FREE Guttering & Rainwater Pipe Quotes!

Guttering and Rainwater Pipe Specialists

PVCu/Plastic is by far the most popular and least expensive option. Roofline materials are available in a number of colours and designs, as well as varied sizes, from dozens of suppliers. PVCu is both cost-effective and long-lasting; a high-quality system may endure for up to 25 years, and you can even have cast-iron-like colours and profiles. The downsides are that the less expensive choices may need to be replaced in 10 years, and the rubber seals used to connect parts are frequently the weak spot, shrinking and splitting as they age, resulting in leaks. Before the introduction of plastics, the most common material for guttering and rainfall pipe was cast iron. It is still in use, although mostly for conservation purposes.

Cast iron is extremely durable, with some 19th-century pipes still in fine working order today. Plus, it looks fantastic, particularly in period-style residences. A disadvantage however is that they requires repainting at least every five years to retain it in excellent working order, and it is costly to purchase. Copper, galvanised steel, and aluminium are among the metals used for rainwater pipes and guttering. All of these metals are low-maintenance and look wonderful in contemporary-style houses. They are significantly less expensive than cast iron versions, but they are not as durable.

Choosing Rainwater Systems

In modern buildings, guttering and drainpipes should be a part of the overall roof design. PVCu is most commonly used in historical homes, with cast iron being the preferred material, while copper is occasionally used on barn conversions. Guttering comes in a variety of materials and lengths up to 3 metres, and it should be installed sloping gently downhill toward the running outlet to maintain proper drainage. A support bracket must be installed at 1m intervals on the guttering. 

Gutter union brackets join two gutter sections together, while gutter angles allow guttering to be routed around a corner. The Hopper is a funnel-shaped rainwater collector that diverts rainwater into a downpipe. The stop end outlet is installed at the end of the guttering to seal the pipeline. The downpipe itself comes in lengths up to 2.5m and is attached to the wall using a specially constructed bracket at the top of the first pipe and then every metre afterwards.

Can you DIY Guttering?

Rainwater systems may be installed by qualified DIY enthusiasts, but you must be comfortable working at heights and have all of the necessary safety equipment. Those without the necessary equipment, expertise, a stomach for heights, or time may hire a roofing professional to complete the job for them, and they can frequently source all of the materials to your requirements.

Guttering- How much does it cost?

The average cost of employing a roofer to replace guttering in a typical home is roughly £900 for uPVC and £2200 for cast iron (including materials and labour).

Finding quotes has never been easier on Top Tradespeople. Simply post your job and we will connect you with up to 3 local Roofers without obligation, and totally free of charge.

Fascia & Soffit Installers Near Me

The roofline of a property refers to several separate areas combined and you may hear roofline and eaves, fascia, bargeboard, soffit and gutters used interchangeably with roofline, since the single word roofline means roughly the same thing as eaves, soffits, fascias and gutters combined. Roofline is effectively all of the timber or uPVC around the edges of the roof but which are not part of the roof.  Each of the parts of the roofline serves a purpose in protecting parts of the roof or adds a finishing touch to the roof. When it comes to the fascia, soffits and cadding their purpose is as folows. The fascia's role is to protect the rafters of the property and support the edges of the roof frame.  The soffits are designed to add protection for the rafters beneath the roof. The cladding is designed to protect the exterior of your property and the bargeboard is on the side of the property (the gable end / gable) and adds a seal to the verge.

Cladding, Fascia and Soffit Specialist

All of the woodwork and guttering surrounding your roof's eaves, including the fascia, soffit, bargeboard, and cladding, is referred to as the roofline. The fascia supports tile edges and protects rafters, while the soffit protects underneath the rafters, the cladding protects the outside of your home, and the bargeboard completes the gable end and seals the verge.

What are the advantages of uPVC Cladding, Fascias and Soffits? 

Roofline products made of uPVC are essentially maintenance free and are extruded, moulded, laminated, and foiled by highly qualified specialists. When contrasted to wooden soffits, fascia, and cladding, which require painting every couple of years to maintain the aesthetic and prevent the wood from decaying, these uPVC construction elements require little or no care once installed. Replacing ageing wood with uPVC roofline items is a popular and practical option, providing a simple and long-lasting solution.

To keep uPVC items looking as good as new, all that is necessary is a periodic cleaning with warm soapy water. Today, there are a variety of colours to complement your home; gone are the days when you could paint your house any colour you wanted as long as it was white! Quality uPVC roofline items will not rot, bend, discolour, or warp due to heat, and will assist to minimise carbon emissions.

uPVC Cladding, Fascia and Soffit Fitting- How much does it cost?

The average cost of labour and materials to replace wooden fascias and soffits with uPVC fascias and soffits on a typical terraced property is roughly £1200. However, this amount is merely a preliminary estimate, and a number of considerations, such as access concerns (such as a conservatory that may require scaffolding), removing existing asbestos soffits, and utilising various size boards, may significantly raise the cost.